Resources

Showersave will work with any Thermostatic shower.

There is a 5-year warranty on all Showersave WWHRS.

• QB1-21XE – 2 Showers*
• Blue QB1-21 – 2 Showers*
• Multivert – Depends on the project.

*Contact us for guidance, consideration must be given to:

• The pipe run for waste pipe.
• The total combined flow rates of the showers.
• The incoming water pressure and any other elements that may cause a pressure drop in the system.

Access panels are required for the Blue QB1-21 because access to the pump is required, should the diaphragm need to be replaced.

Yes, you can find them here.

No, because Showersave have checked with the UK Water Regulators and it is not required.

Read the Update on WWHRS Technical & Installation Guidance here.

Complete the Trade Account Registration form here. 

Once submitted, your application will be processed and notification of approval or rejection will be sent to the registered email address.

Only merchants, developers, contractors and other relevant industry professionals will be considered for a Showersave trade account.

The Showersave WWHRS App is a quick and easy way to register installations, instruction on how to use the App are here.

Registration is a SAP requirement and the Showersave WWHRS App has been developed to reduce paper based manual processes.

We endeavour to get your orders to you as soon as possible. When your order is placed we will advise you of the delivery schedule. Unfortunately couriers cannot guarantee next day delivery.

We can advise you of the delivery cost when your order is placed.

The parts are:

• 50mm Heat Exchanger, Copper.
• Cyclone, 50mm Cyclone.
• McAlpine, 2”/50mm Bottom Connector, PP/PVCU.
• Walraven, Pipe Clamps, 2S Clamp zinc plated EPDM M8/10 53-61mm.
• Walraven, Hanger Bolts, zinc plated Torx M8*80mm.

The parts are:

• 50mm Heat Exchanger, Copper.
• Cyclone, 50mm Cyclone.
• Back Plate, 200mm (w) 463mm (h) 150mm (d, with the pump & transformer).
• 12v Power Pack.
• 12v Self Priming Diaphragm Pump.
• 12v Sensor.
• McAlpine, 2”/50mm Bottom Connector, PP/PVCU.
• Walraven, Pipe Clamps, 2S Clamp zinc plated EPDM M8/10 53-61mm.
• Walraven, Hanger Bolts, zinc plated Torx M8*80mm.

12v DC, based on an average 5 person home, it would cost less than £4 per year to run the pump.

The Multivert is designed and developed for specific commercial projects.

Please contact us for more information on the Multivert.

Yes, you can get the certificates for the QB1-21XE and Showersave Blue QB1-21 here.

Please contact us for more information on the Multivert.

QB1-21XE – no maintenance required.

Blue QB1-21 – no scheduled maintenance intervals, however access to the pump is required, should the diaphragm need to be replaced.

Legionella risk and mitigation, the Showersave should be installed following one of the three SAP approved Showersave installation methods, by a suitably qualified plumber. Following the installation guidelines will mitigate the Legionella bacteria in the water system.

Please contact our sales team for a quotation or complete the form here.

Tel: +44 (0) 28 9334 4488
Email: sales@showersave.com

Please contact our sales team to place your order, or complete the form here.

Tel: +44 (0) 28 9334 4488
Email: orders@showersave.com

Please contact our sales team for replacement parts, or complete the form here.

Tel: +44 (0) 28 9334 4488
Email: orders@showersave.com